|
|
|
|
| Home | Profile | Products | Contact Us | Enquiry |
Showcase
|
We offer a wide range of capacitors and reactive power management systems which are manufactured under the supervision of quality inspectors and in technically advanced conditions. Our range of products are of high performance and are designed as per the requirement of our clients. Our product gamut includes:
|
|
| AB Lifasa capacitors are manufactured using the most advanced technology and is achieved from an indepth knowledge of the manufacturing process and also from very strict laboratory and Research & Developments tests. |
|
| AB Lifasa Automatic capacitor/Filter banks are used for centralised compensation of power factor in low voltage installations. AB Lifasa also provides wide range of automatic capacitor banks with harmonic filters. These equipments are supplied completely assembled and are ready for use. It is only necessary to connect it to the mains with cable of adequate cross section, and to supply the operation signal from a suitable current transformer. |
|
| Compensation is recommended for the power systems like capacitor bank, automatic capacitor bank, used for energy distribution or to feed H.V machines, where consumer could avail return on investment within a shorter period. High voltage power capacitors are meant for power systems where network voltage is more than 1 kV. High voltage capacitor banks are mainly installed in the following type of applications:
|
|
| Capacitor that appears in this chapter are specially designed for applications where there are some necessary capacities with many power electronics components like Switching circuits, absorption circuits, low voltage special filters, continuous input systems, electronic capacitor, industrial power capacitor, etc. In general any application that needs a high stability of capacity on time and/or high connection currents. |
|
| Power Transmission and distribution networks are designed to operate with sinusoidal voltage and current having constant frequency. However there are number of non -linear loads, such as thyristor drives and converters, that generate harmonics on the network, causing distortion in the voltage and current waveforms. These harmonic filters are used when the main objective is not the reactive power compensation at the fundamental frequency, but to reduce the harmonic distortion in the supply system. |
|
| Reactive power controllers MCE and MCX are designed to measure the reactive power of an installation and to give the necessary instructions for connecting & disconnecting capacitors in order to maintain the desired cos Ö. All the controllers are commanded by a microprocessor that ensures an uniform ageing of contractors and capacitors by using a circular connection sequence that takes into account the time that each capacitor has been switched on. Power factor value to be reached can be adjusted in a continuous way, between 0.85 inductive and 0.95 capacitive. Standard working programs for controllers are 1:1:1:1, 1:2:2:2, 1:2:4:4, 1:2:4:8 and 1:1:2:2. |
|
We offer tailor made compensation systems to Power Systems.
|
|
| We conduct Harmonic Analysis and Energy Audit to Electrical systems and provide Complete Solution Packages like industrial energy audit and utility energy audit , to clients in order to improve power quality through reactive power compensation and harmonic control. |
|
Mr. Alok Kumar
(Director)
Gat No. 258/1, Plot No. 8/2, Village Khalumbre, Chakan - Talegaon Road, Tal. Khed, Near Lohr Tsi Compound
Pune,
Maharashtra -
410 501,
India
Telephone: +(91)-(2135)-613500/ 613502/ 613503
© AB Power System Solution. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited
